Handheld Semi-Automatic Heated Syringe Cartridge Filler
(as of Oct 19,2021 20:38:07 UTC – Details)
25 ml Heated Cartridge Filler. The cartridge filler with heated annular heat barrel for oil cartridges, disposable pens or syringes. With the digital adjustable temperature control, you want and will never run the risk of burning caused by direct contact with a heating coil Desired cartridge volume is adjusted using an easy to read dial in 0.5ml increments from 0.5ml – 2.5ml. Oil is precision dosed via a stainless-steel piston and drip free stainless steel luer-lock tip. Filling cartridges, pens or syringes has never been easier or more affordable. User friendly as possible for the operation 1.Preheat oil to desired temperature to promote flowability. 2. Preheat gun via easy to read LED screen and set your temperature. 3.Fill barrel by drawing back the piston to suck the oil into the heated barrel. 4. Fill Cartridges. Specification Capacity: 25ml with Step Increments: 0.5ml, 1.0ml., 1.5ml., 2.0ml., 2.5ml. Temp Range: Room Temp – 194F Max 150W heater load 110V 2 AMP Fuse Power Cord Standard detachable power cord, detachable Grounded 3 Prong Head Connection Package Includes (1) Control Unit (1) Semi-Automatic Cartridge Filling Gun (25ml) (1) 25ml Oil Barrel w/Gasket (1) Heat Barrel (4) 14g Stainless Steel Luer Lock Blunt Fill Needle (1) Instruction Manual 110 Volt Power Supply. Luer lock cap is not included in the package.
Is Discontinued By Manufacturer:No
Product Dimensions:14 x 11 x 3 inches; 3 Pounds
Item model number:0612637671630
Date First Available:June 30, 2020
Country of Origin:China
Easy to use, accurate control oil volume, heated for easy oil flow, temperature control
Polypropylene Barrel – Chemically Resistant to: Isopropyl Alcohol, Ethanol, Butane, Hexane, Glycerin, Glycols, Terpenes, and most Acids
Adjusts from 0.5, 1, 1.5, 2, 2.5ml Shots, Very Accurate Dosing
Lure Lock Hub For All Types of Size Attachments Needles. Luer Lock Cap is not included as using plunger to suck in is a better practice.
Tip 1- NO touch on button “Set” and “˃”, after turning on the power. Tip 2: ONLY press the up arrow (^) and down arrow (∨) to the set temperature, then wait for the temperature display to blink for a few times. Tip 3:WAIT the temperature to rise to and above the set temperature, then falls for a couple of preheating. Display temp can be much higher than set temp for the first couple of heat cycles. Then stabilize close to set temperature. .